2 Pole Orange Silicone Connector Seal

2 Pole Automotive Connector Seal Manufacturer – Silicone Connector Cavity Seal

ARPL manufactures high-quality 2 pole silicone connector seals for automotive wiring harness applications requiring high temperature performance. As a leading automotive connector seal supplier in India, we supply connector cavity seals for automotive wiring harness to OEM and Tier-1 wiring harness manufacturers serving global automotive programs. This silicone rubber connector seal provides essential IP67/IP68 environmental sealing for sensitive automotive electrical connector seal requirements.

The 2 pin connector seal is installed inside female connector housings where it seals around individual wires entering the connector. This high temperature wiring harness seal prevents ingress of water, dust, and environmental contaminants that could cause electrical failures. Applications include exhaust gas temperature sensor connector seal, connector seal for turbocharger and EGR applications, DPF sensor connector seal, SCR system connector seal, EV battery connector seal, EV motor controller connector seal, and any underhood connector seal for harsh environments where temperatures exceed 120°C.

High Temperature Silicone Material Properties

This automotive connector seal is manufactured from silicone rubber (VMQ) connector seal material, selected specifically for its exceptional temperature resistance and long-term stability. High temperature silicone connector cavity seals are the preferred choice where NBR and EPDM materials cannot perform.

• High Temperature Silicone Seal -55°C to +200°C: Continuous operation with intermittent capability to +230°C
• UV and Ozone Resistant Connector Seal: Excellent weathering resistance for exterior automotive connector seal applications
• Low Compression Set Silicone Connector Seal: Maintains sealing force over extended periods under thermal cycling
• High Voltage EV Connector Seal: Good dielectric properties suitable for EV connector seal for high voltage applications
• RoHS Compliant Connector Seal: REACH compliant connector seal meeting automotive environmental standards

ARPL also offers alternative materials for custom connector seal development: NBR for oil/fuel resistance (-40°C to +120°C), EPDM for weather/ozone resistance, HNBR for combined oil resistance and higher temperature, and FKM (Viton) for extreme chemical and temperature resistance.

Why Choose ARPL – Custom Connector Seal Manufacturer

With over 30 years as an ISO 9001 and IATF 16949 rubber components manufacturer, ARPL delivers manufacturing excellence in precision connector seals for wiring harness manufacturers including high-precision tooling, flash control with cryogenic deflashing, zero-defect quality systems, and full PPAP support. We serve as an automotive connector seal supplier to customers in Germany, USA, Mexico, Turkey, Brazil, UK, UAE, Thailand, Vietnam, Poland, Czech Republic, and Hungary.

Related Sealing Products

Explore our 2 pole black NBR connector seals for engine bay connector sealing solution with oil resistance, rubber grommets for wiring protection, rubber O-rings and sealing rings, and rubber gaskets and sealing solutions.

Industry Applications for High Temperature Silicone Connector Seals

Our 2 Pole Orange Silicone Connector Seal is engineered to provide reliable IP67/IP68 environmental sealing across demanding high-temperature automotive, commercial vehicle, and EV applications. This high temperature rubber seal for connectors is ideal for underbody and underhood connector sealing where operating temperatures exceed 120°C or where extreme cold flexibility is required.

Vehicle Segment Applications

ARPL supplies silicone connector seals to OEMs and Tier-1 wiring harness manufacturers serving diverse vehicle segments with high-temperature requirements:

• Passenger Cars: Exhaust sensors, turbocharger connectors, and underhood high-temperature applications
• Commercial Vehicles: DPF/SCR sensor connectors, exhaust aftertreatment system connectors for trucks and buses
• Electric Vehicles (EV): Battery management system (BMS), motor controller, inverter, and DC fast charging connectors
• Hybrid Electric Vehicles (HEV/PHEV): High-voltage connectors, regenerative braking sensors, and thermal management systems
• Motorcycles: Exhaust sensor connectors, exposed wiring harness applications requiring UV resistance
• Off-Highway Vehicles: Construction and agricultural equipment with high-temperature engine and exhaust applications

High-Temperature Operating Environments

Silicone connector seals excel in environments where extreme temperatures are encountered:

• Exhaust Gas Temperature (EGT) Sensors: Operating at +200°C continuous near exhaust manifold and turbocharger
• Turbocharger Actuator Connectors: Exposed to radiant heat from turbo housing (150°C to 200°C)
• EGR Valve & Cooler Connectors: High exhaust gas temperatures in emissions control systems
• Diesel Particulate Filter (DPF) Sensors: Temperature and pressure sensors in exhaust aftertreatment
• SCR System Connectors: AdBlue/DEF dosing unit and NOx sensor connectors
• Lambda/Oxygen Sensors: Pre-cat and post-cat O2 sensor connectors near exhaust
• EV Motor Controllers: High-voltage connectors in thermally demanding motor and inverter applications
• Exterior Connectors: UV-exposed lighting, antenna, and sensor connectors requiring weathering resistance

OEM Connector System Compatibility

ARPL develops silicone connector cavity seals compatible with major automotive connector systems used globally by OEMs and Tier-1 suppliers:

• Compatible with standard 2-way female connector housings from leading connector manufacturers
• Custom development available for proprietary OEM connector designs
• Supports single-wire and multi-wire sealing configurations
• Available in multiple wire gauge accommodations (0.5mm² to 2.5mm² typical)
• Designed to meet automotive connector sealing standards including USCAR, LV214, and OEM-specific requirements

Industry Standards & Compliance

Our silicone connector seals are manufactured to meet stringent automotive industry requirements:

• IP67/IP68 Protection: Dust-tight and water immersion resistant when properly installed
• Temperature Range: -55°C to +200°C continuous operation
• Material Compliance: RoHS compliant, REACH compliant, ELV compliant
• Quality Certification: Manufactured under ISO 9001:2015 and IATF 16949:2016 quality management systems
• Automotive Testing: Tested per OEM specifications for compression set, thermal aging, and weathering
• PPAP Support: Full Production Part Approval Process documentation available

Why Choose Silicone Material for Connector Seals?

Silicone Rubber (VMQ) is the preferred elastomer for high-temperature automotive connector seals due to its unique combination of properties:

• Extreme Temperature Range: Operates from -55°C to +200°C continuous, with intermittent capability to +230°C
• UV and Ozone Resistance: Excellent weathering resistance for exterior and exposed applications
• Low Compression Set: Maintains sealing force over extended periods even under thermal cycling
• Excellent Low-Temperature Flexibility: Remains flexible in extreme cold where other materials become brittle
• Electrical Insulation: Good dielectric properties for high-voltage EV applications
• Long Service Life: Resistant to aging, oxidation, and degradation over time

Looking for a different material? ARPL also manufactures connector seals in NBR for oil-resistant applications (-40°C to +120°C), EPDM for weather sealing, HNBR for combined oil resistance and higher temperature, and FKM (Viton) for extreme chemical and temperature resistance. Contact our engineering team for material selection assistance.